Craft Town Hobby Land USA - Where it pays to shop with a friend!

Non-Stick Craft Sheet™

Our 15" x 18" reusable, protective sheet is the answer to all of your craft surface needs. Nothing sticks to it! The slick, non-porous material withstands high temperatures, making it the perfect compliment to Melt Art™ and the Melting Pot®. Ultra Thick Embossing Enamel™ (UTEE), candle wax, soap chips and even hot glue won't penetrate or distort its smooth-as-glass finish. Any excess melted product, once cooled, can be easily removed and placed back into the Melting Pot or stored for future projects. Clean-up is quick and easy, ready to use again and again.

•Protect your work surface
Our paper-thin Craft Sheet is never in the way, it's barely noticeable, yet you'll love the results.

•Easy Clean-up, Just Peel-off
Once cooled and/or solidified, peel or wipe UTEE, paint, glue, wax, clay, soap and more right off the Craft Sheet.

NSC20677

The Non-Stick Craft Sheet™ is great for:
	*The Melting Pot®*	*Embossing*

*Painting*	*Stamping*	*Baking*

The award-winning Inkssentials™ Non-Stick Craft Sheet™

The award-winning Inkssentials Non-Stick Craft sheet is the answer to your craft surface needs! It is an indispensable tool for every craft room or art studio. The multi-purpose Non-Stick Craft Sheet provides protection to a crafter's work surface for many craft mediums. This larger (15" by 18") reusable non-stick craft surface is perfect for working with 12" by 12" scrapbook pages, rubber stamping, card making, altered art books and more.

• Heat Resistant up to 400 degrees and it repels liquids! Protect your work surface from heat tools, craft irons, or any heat-producing craft appliance such as the Ranger Melting Pot®.

• The slick surface allows for easy clean up - just peel off paint, embossing powder, glues and more or it can be wiped clean with a paper towel.

• Reusable over and over for multiple craft projects.

Project uses:

• All ink applications - stamping, brayering, resist and distressing techniques

• Ideal for use with Adirondack® Alcohol Inks - no ink is wasted and clean up is easy with a little Adirondack® Alcohol Blending Solution and a paper towel

• Use as a direct surface for monoprinting techniques

• Use it for Adirondack Color Wash™ Sprays

• Heat emboss with embossing powders and inks

• Ranger Melt Art® projects with the Melting Pot and UTEE

• Other melting projects such as beeswax, hot glue, soap chips, candle wax, solder

• Use to protect baking surface for baking polymer clay or shrink plastic

• Any projects using glues such as Ranger Glossy Accents™, adhesives, decoupage - glues just peel off when dry

• Painting (to protect your work surface)

• Directly as a paint palette

• Any excess melted product, once cooled can be easily peeled off. So melted embossing powder can be peeled off for an embellishment, or excess paint can be peeled off and tossed.

Care of Non-Stick Craft Sheet
To extend the use of the Inkssentials Non-Stick Craft Sheet, store rolled up or flat. Do not fold. Do not use as a surface for cutting.

Quick project ideas:
Create page or card embellishments with Glossy Accents™ - pebble-like dimensional embellishments can be created by simply pouring Glossy Accents directly onto the Non-Stick Craft Sheet in a circle or other shape and letting it dry for 24 hours. Once dry, peel off by lifting up the Non-Stick Craft Sheet off of your work surface and peel it away from the embellishment from underneath. Use with decorative papers or other ephemera. Cut to size of the embellishment and adhere with Glossy Accents!

Create page or card embellishments with UTEE and the Melting Pot™. Carefully pour melted UTEE from the Melting Pot onto the Non-Stick Craft Sheet in a puddle a little larger than your desired stamp and press stamp into hot UTEE. Let set for a few seconds, then lift off the stamp and you have a dimension accent for your artwork. This can be further embellished with either rubbing Adirondack® Metallic Mixatives or Posh Metallic Inkabilities™ on the raised surface of the UTEE. The UTEE embellishment will lift off the Non-Stick Craft Sheet easily.

Monoprint Card
using the Non-Stick Craft Sheet™
Skill Level: * *

Create a colorful card with a dreamy, metallic effect in minutes.

Created by Bonnie Egenton
Technique by Tim Holtz

Materials List

• Ranger Non-Stick Craft Sheet™
• Ranger Adirondack® Alcohol Inks - Wild Plum, Stonewashed, Stream
• Ranger Adirondack® Metallic Mixatives - Pearl, Copper, Silver
• Ranger Adirondack® Alcohol Ink Applicator and Felt
• Ranger Adirondack® Alcohol Ink Blending Solution
• Ranger Archival™ Jet Black Ink Pad
• Ranger White Gloss™ Cardstock - 8 1/2 x 11 inches
• Purple Cardstock
• Gray Cardstock
• Glue Stick
• Stamp - Inky Antics

Instructions

(1) Cut White Gloss Paper into 4 sheets - 4 1/4 x 5 1/2

(2) On Non-Stick Craft Sheet, apply a random squiggle of Adirondack Metalllic Mixative in Copper. Note: Touch the bottle tip to the Non-Stick Craft Sheet and lightly lay out the squiggle. This controls where the ink lands - no need to squeeze the bottle.

(3) Add Adirondack Alcohol Inks in drops, lines, dots, etc. over the metallic inked area. Note: Touch the bottle tip to the Non-Stick Craft Sheet to lay drops, lines and dots. This controls where the ink lands.

(4) Take a piece of the Gloss Paper - GLOSS SIDE DOWN - and place onto the inks on the craft sheet and press. Twist in one direction and remove. It dries almost instantly.

(5) For a second generation print, place Blending Solution over the remaining inks and make another print on a piece of Gloss Paper in the same direction or try twisting in different directions. Now you have two monoprints for use in two cards.

(6) Stamp image over the monoprint background with Archival Ink and let dry.

(7) Take another piece of Gloss Paper. Place a piece of felt on the Alcohol Ink Applicator. Apply a row of Copper Metallic Mixative, a row of Pearl Metallic Mixative, and a row of Silver Metallic Mixative on the felt and immediately start pouncing the Alcohol Ink Applicator onto the Gloss Paper on the Non-Stick Craft Sheet. Change the direction of the pouncing frequently to keep the technique random. The Gloss Paper will dry almost immediately and you will have a cool Metallic Mixative background paper.

(8) Trim the stamped monoprint and layer onto trimmed gray cardstock. Layer the gray cardstock onto the Metalllic Mixative background paper (trimmed if needed).

(9) Cut lavender cardstock in half and fold one portion into a card. Adhere the monoprint layers to the card.

Tip: Clean off the remaining inks on the Non-Stick Craft Sheet by applying Blending Solution and wipe with a paper towel. Quick and easy!